ApCoCoA-1:HowTo:Run ApCoCoA on a Computing Server

From ApCoCoAWiki


This HowTo shows you how to run ApCoCoA on a Linux server at terminal.


  • Download ApCoCoA QT and unzip the file. This HowTo will take ApCoCoA 1.9.0 as an example.
wget http://www.apcocoa.org/download/apcocoa/linux-x86_64/apcocoa-1.9.0-QT-linux-x86_64.tgz
tar xzvf apcocoa-1.9.0-QT-linux-x86_64.tgz

Run ApCoCoA

ApCoCoA with Text Interface

Go to the folder ApCoCoA-1.9.0. The contents in the folder are as follows. In the following, assume that you are working at the directory ApCoCoA-1.9.0/.

ApCoCoA files.jpg

Run the following command at terminal to start the ApCoCoA text interface.


ApCoCoA text.jpg

You can run any (Ap)CoCoA command in this interface.

ApCoCoA text1.jpg


In many cases you also need to run the ApCoCoAServer. Here, assume that you have some terminal tools, like "screen", "tmux", etc., to create new terminal sessions, and that you are able to switch between terminal sessions without stopping the running program.

Create a new terminal session for the ApCoCoAServer and run the following command to start the ApCoCoAServer.


ApCoCoA Server0.jpg

Observe that the ApCoCoAServer is running on the default port 49344 (0xc0c0). You can run the ApCoCoAServer on another port n by using option -p as follows.

./ApCoCoAServer -p n

Now let us switch to the terminal session for the ApCoCoA text interface again. Execute the following commands.

NCo.IsFinite(X, M); -- Check whether <x,y>/<x^3,yxy,xyx> is finite

The function NCo.IsFinite uses the ApCoCoAServer. You will get the following result in the ApCoCoA text interface.

ApCoCoA text2.jpg

And you can see the following message in the terminal session for the ApCoCoAServer.

ApCoCoA Server1.jpg

ApCoCoA Program Files

Sometimes it is useful to write commands or functions in ApCoCoA program files. For example, we define a function for computing Fibonacci numbers as follows.

Define Fib(N)
  If N<=1 Then
    Return 0;
  Elif N=2 Then
    Return 1;
    Return Fib(N-2)+Fib(N-1);

In order to load this function to ApCoCoA, we write the function in an ApCoCoA program file, say test.coc, in the directory ApCoCoA-1.9.0/. Then, using the following command, we run ApCoCoA which processes the file test.coc as a batch file. Then, we can use the function Fib(N) to compute Fibonacci numbers in ApCoCoA.

./apcocoa test.coc

ApCoCoA text3.jpg

Note that, before running apcocoa, you may have to check that if APCOCOA_PREFIX is set properly. APCOCOA_PREFIX is the directory for your ApCoCoA, and it is set in the file apcoca in the directory ApCoCoA-1.9.0/. You can use an edit tool to edit it.

ApCoCoA prefix.jpg