Difference between revisions of "ApCoCoALib:CompilationInstructions"

From ApCoCoAWiki
Line 253: Line 253:
 
  make install
 
  make install
  
'''Note:''' --enable-cxx gives you C++ support. This is important for some of the optional libs.
+
'''Note:''' --enable-cxx gives you C++ support. This is important for some of the optional libs. Check if libtool is installed on your system. The configure script makes some entries to libtool that are needed later for the configure script of linbox.
  
 
===BLAS/Lapack===
 
===BLAS/Lapack===

Revision as of 14:35, 3 August 2009

This page describes how to compile the ApCoCoALib as of 0.99.08. Please note, the former page HowTo:Compile_ApCoCoALib_on_Windows is outdated, just follow the instructions below.

Requirements

You need at least the following libraries:

Library Current Recommended Minimum Dependencies Notes
CoCoALib 0.99.30 0.99.28 - GMP -
GMP 4.3.1 4.2.4 4.1.4 M4 -
Boost 1.39 1.39 1.35 none System, Filesystem & Thread needed for ApCoCoA-Server


Optional:

Library Current Recommended Minimum Dependencies Notes
BLAS ? ? ? none for ABM & numerical functions
Lapack 3.2.1 3.2.1 - BLAS for ABM & numerical functions
LinBox 1.1.6 1.1.6 1.1.6 BLAS, Givaro, Lapack, GMP -
Boost 1.39 1.39 1.35 none Thread & Program Options needed for Border Basis Framework
IML 1.0.2 1.0.2 1.0.2 GMP, ATLAS -
Givaro 3.2 3.2 3.2 none -
ATLAS 3.9.11 (unstable) 3.8.3 (stable) 3.8.3 none -

The Config File

ApCoCoALib lets you choose which of the optional features you want to compile in a very flexible way. Usually you store all build related configuration parameters in a file called lib.config and pass its location to the configure script via the --with-libconfig= parameter. The lib.config file looks as follows.

 ######################
 # Mandatory settings #
 ######################
 
 # Path to your Boost library include directory, e.g.
 #BOOSTFLAGS=-I"/home/skaspar/lib/boost_1_38_0/include/boost-1_38"
 BOOSTFLAGS=   # Mandatory, cannot be left empty
 
 # Linker flags of your Boost thread libraries plus linker flags of
 # additional libraries needed by Boost, e.g.
 #BOOSTLIBS="/home/skaspar/lib/boost_1_38_0/lib/libboost_thread-gcc43-mt.a" \
 #          -lpthread
 BOOSTLIBS=   # Mandatory, cannot be left empty
 
 #####################
 # Optional features #
 #####################
 
 # Uncomment the following flag if you want to use the
 # Border Basis Framework
 #BBFFLAGS=-DUSEBBFramework
 BBFFLAGS=   # Can be left empty if you do not want to use
             # the Border Basis Framework
 
 # Linker flags of your Boost program_options and thread
 # libraries plus linker flags of additional libraries needed
 # by Boost, e.g.
 #BBFLIBS="/home/skaspar/lib/boost_1_38_0/lib/libboost_program_options-gcc43-mt.a" \
 #        "/home/skaspar/lib/boost_1_38_0/lib/libboost_thread-gcc43-mt.a" \
 #        -lpthread
 BBFLIBS=   # Can be left empty if you do not want to use
            # the Border Basis Framework
 
 # Uncomment the following flag if you want to use
 # IML-driven computations    
 #IMLFLAGS=-DUSEIML
 
 # Path to your IML include directory, e.g.
 #IMLFLAGS:=$(IMLFLAGS) -I"/home/skaspar/lib/iml-1.0.2/include"
 
 IMLFLAGS:=$(IMLFLAGS)   # Can be left empty if you do not
                         # want to use IML-driven
                         # computations
 
 # Linker flags of your IML library plus linker flags of
 # additional libraries needed by IML, e.g.
 #IMLLIBS="/home/skaspar/lib/iml-1.0.2/lib/libiml.a" \
 #        -lcblas \
 #        -latlas \
 #        "/usr/lib/libgmp.a"
 IMLLIBS=  # Can be left empty if you do not want to use
           # IML driven computations
 
 # Uncomment the following flag if you want to use LinBox-
 # driven computations
 #LINBOXFLAGS=-DUSELinBox
 
 # Path to your LinBox include directory plus path to
 # additional include directories needed by LinBox, e.g.
 #LINBOXFLAGS:=$(LINBOXFLAGS) \
 #            -I"/home/skaspar/lib/linbox-1.1.6/include" \
 #            -I"/home/skaspar/lib/givaro-3.2.13rc1/include"
 LINBOXFLAGS:=$(LINBOXFLAGS)   # Can be left empty if you
                               # do not want to use LinBox-
                               # driven computations
 
 # Linker flags of your LinBox library plus linker flags
 # of additional libraries needed by LinBox, e.g. 
 #LINBOXLIBS=/home/skaspar/lib/linbox-1.1.6/lib/liblinbox.a \
 #           -lgmpxx \
 #           /home/skaspar/lib/givaro-3.2.13rc1/lib/libgivaro.a
 LINBOXLIBS=   # Can be left empty if you do not
               # want to use LinBox-driven
               # computations
 
 # Uncomment the following flag if you do not want
 # to use the BLAS and Lapack libraries
 NUMFLAGS=-DUSENoLapack
 
 # Uncomment the following flag if you want to use
 # the BLAS and Lapack libraries and you are using
 # Linux or Cygwin
 #NUMFLAGS=-DUSEF77Lapack
 
 # Uncomment the following flag if you want to use
 # the BLAS and Lapack libraries provided by the
 # Accelerate Framework on MacOSX
 #NUMFLAGS=-DUSEAccFW
 
 # Linker flags of your BLAS and Lapack libraries
 # plus linker flags of additional libraries needed
 # by BLAS and/or Lapack.
 #
 # Example flags on a Linux or cygwin system
 #NUMLIBS=-llapack -lblas -latlas
 #  
 # Example flags on a MacOSX system using the
 # the Accelerate Framework
 #NUMLIBS=-bind_at_load -framework accelerate
 NUMLIBS=   # Can be left empty if you do
            # not want to use the BLAS and
            # Lapack libraries

Step by Step build instructions

Get a copy of the sources for CoCoALib from http://cocoa.dima.unige.it/cocoalib/changelog-0.99.html and ApCoCoALib from the subversion repository.

Build the CoCoALib. You should consult the CoCoALib documentation in case of problems.

Build the ApCoCoALib: Unpack the tarball in the same directory as CoCoALib-0.99. This is the default location that ApCoCoALib will look for. You can change it but at the moment this requires editing of the COCOA_DIR_NAME in the file configuration/autoconf.mk. We will offer the location of CoCoALib as a config option in the libconfig file in a later release.

Again, please note that

  • the CoCoALib directory must be named as CoCoALib-0.99
  • the CoCoALib and ApCoCoALib directory must reside in the same directory.

Now run configure:

[mabshoff@dhcp75 ApCoCoALib-0.99]$ ./configure
ERROR: Specified config file is not a readable file: ""
Please specify a config file for the external numerical libraries via --with-libconfig

You get an error because ApCoCoALib needs to be told where to find several external libraries and options. One option is to set CONFIG_LIB="lib.config" in the configure script and create the file called lib.config with the following text:

# we don't want to compile in any numerical libraries
NUMFLAGS=-DUSENoLapack 

With this config file you deactivate all numerical methods provided by ApCoCoALib. Chances are you do not want to do this. But since building the numerical libraries can be a little complicated we provide precompiled libraries and config examples at http://apcocoa.org/hg/NumLibs/file/ FIXME: Add more details and tarballs.

In case you have Mac Os X as your operating system, it is very easy to include the numerical Libraries. Per default, you have an installed Accelerate Framework, which includes BLAS and Lapack, which are the numerical libraries we currently use. To activate the accelerate framework, your lib.config should include the lines:

NUMFLAGS=-DUSEAccFW

# linker options:
NUMLIBS=-bind_at_load -framework accelerate

With a working set of libraries we rerun configure and get:

[mabshoff@dhcp75 ApCoCoALib-0.99]$ ./configure  --with-libconfig=../NumLibs/lib.config.USEF77Lapack
The C++ compiler is g++ 4.1.1 20070105 (Red Hat 4.1.1-51)
The C++ optimized compilation flags are "-Wall -pedantic -fPIC -O2"
Using GMP library version 4.2.1 found in "/usr/local/gmp-4.2.1-static/lib/libgmp.a".
and GMP header file found in "/usr/local/gmp-4.2.1-static/include/gmp.h" 
Configuration process complete: info saved in configuration/autoconf.mk
-----------------------------------------------------------------------

Everything is fine now. Just enter

 make

and the ApCoCoAServer as well as the ApCoCoALib should be build.

In case of problems please complain in the forum.

Building External Dependencies

Windows

Compilers

MSVC 2003, MSVC 2005, Intel C++, Cygwin

CoCoALib

Build from source, prebuild packages for MSVC 2005, MSVC 2003, Cygwin

GMP

Brian Gladman's build for MSVC, from source for Cygwin/MinGW.

Note: Check if the programs bison, flex and m4 are installed in cygwin.

./configure --enable-cxx --host=i386-pc-cygwin --prefix=(install-dir)
make
make check (important!!!)
make install

BLAS/Lapack

Cygwin ships with BLAS and Lapack from netlib.org compiled as a dynamic library. These are regularly tested and do work well. Alterntively you can compile ATLAS, but there are occasional linker issues.

If you use the Microsoft's compilers you can use the Intel MKL, GotoBLAS or ATLAS 3.8.0. It is also possible to build netlib.org's BLAS and Lapack using a Fortran compiler from Intel.

ATLAS

cd atlas-dir
mkdir ATLAS_build
cd ATLAS_build
../configure -A 6 -V 1 -b 32 --prefix=(install-dir)
make
make check
make install

LinBox

Build from source, Cygwin only at the moment. It is highly recommened that you build LinBox as a static library, there have been linking issues with a dynamic LinBox in the past. You might also need to tweak LinBox's m4 BLAS detection macros when using netlib.org's BLAS and Lapack.

Linux

Compilers

g++ 3.3 up to 4.2

CoCoALib

Build from source.

./configure --with-libgmp=(path-to-libgmp.a)
make

GMP

Distribution package, build from source.

./configure --enable-cxx --prefix=(install-dir)
make
make check (important!!!)
make install

Note: --enable-cxx gives you C++ support. This is important for some of the optional libs. Check if libtool is installed on your system. The configure script makes some entries to libtool that are needed later for the configure script of linbox.

BLAS/Lapack

Distribution package, build from source: ATLAS, netlib.org, GotoBLAS, IntelMKL

ATLAS

Build from source. Install instructions:

tar -xvzf atlas3.xx.tar.gz
cd ATLAS
mkdir ATLAS_build
cd ATLAS_build
../configure --prefix=(install-dir) -b 32 (or -b 64 for 64 Bit support)
make
make check
make install

Important: For compiling ATLAS you need an extra build-directory, that must be within the directory where you extracted your files to. Call the configure-script from within the build-directory, as noted above. For further informations see atlas_install.pdf in ATLAS/doc. Please also see the .pdf if you have some kind of special architecture like 64bit.

Note for Laptop-Users: You have to set you CPU power scheme to "performance", in order to have maximum speed for the tests, that are performed during the ATLAS compiling routine. If you have a DualCore remember to do this for both cores!
To change the power scheme you can use tools like cpufrequtils, normally found within the repository of your package manager.

LinBox

Distribution package. Build from source.

./configure --prefix=(install-dir) --with-blas=(atlas-dir) --with-givaro=... --with-gmp=...
make
make check
make install

Note: For 64-Bit apply the Patch from the Forum, see 2nd Post. This fixes the multiple definiton errors.

Givaro

Distribution package. Build from source.

./configure --prefix=(install-dir) --with-gmp=(gmp-dir)
make
make check
make install

MacOSX

The following steps were taken on an Apple MacBook (Intel Core 2 Duo), OS X 10.4.

Compilers

Xcode 2.4.1 recommened, for current releases we are using xcode 2.5.

CoCoALib

Build from source.

Boost

This might not be the best way to supply the '-m64' argument, but it works.

 ./configure [--prefix=<path>]
 ./tools/jam/src/bin.macosxx86/bjam  -d+2 --user-config=user-config.jam architecture=x86 address-model=64 cxxflags=-m64
 ./tools/jam/src/bin.macosxx86/bjam  --user-config=user-config.jam --prefix=<> --exec-prefix=<> --libdir=<> --includedir=<>  architecture=x86 address-model=64 cxxflags=-m64 install

GMP

build from source, can be tricky, need the right patch and working xcode. Try the following:

 ./configure [--prefix=<>] --enable-cxx
 make
 make check
 make install

BLAS/Lapack

AccelerateFrameWork recommended (installed per default). Also possible: build from sources: ATLAS, netlib.org installer: IntelMKL

LinBox

build from source

Givaro

 ./configure [--prefix=<>] --with-gmp=</path/to/dir> CXXFLAGS=-m64
 make
 make install

In file givaro-config.h the flag __GIVARO_GMP_NO_CXX must not be set. Otherwise we got problems with wrong includes compiling ApCoCoA.

Linbox

Apply the patch given in http://www.apcocoa.org/forum/viewtopic.php?f=20&t=983

 ./configure --prefix=<> --with-gmp=<> --with-givaro=<> CXXFLAGS=-m64
 make
 make install

IML

Now, that was quite involved. If anyone knows a better way to get IML compiled, please let us know.

 ./configure -prefix=<> --with-gmp-lib=<> --with-gmp-include=<> --with-atlas-include=<> --with-atlas-lib=<> CFLAGS=-m64

(Yes, its CFLAGS and _not_ CXXFLAGS) After configuring, do the following:

 cp librepl.a repl
 cd repl/.libs
 ln -s ../librepl.a librepl.a
 echo "!<arch>" > repl/.libs/librepl.a

On a mac, this seems to be necessary since libtool does apparently not work properly (any help on this is welcome) and we have to fool ar (this approach is just mimicked from a working Linux compilation).

 make
 make check
 chmod 755 config/install-sh

(Do not ask...)

 make install

ATLAS

(Used gFortran, downloaded from http://r.research.att.com/tools)

 ../configure --prefix=<>
 make
 make install

Solaris/UNIX

Compilers

g++ 3.3 up to 4.2, SunPro compiler difficult to use due to problem with gmpxx.h

CoCoALib

Build from source

GMP

Distribution package, build from source

BLAS/Lapack

recommneded: SunPerfLib build from sources: ATLAS, netlib.org

LinBox

build from source

ToDo

  • configure no longer errors out, but write a warning
  • make links to targz'ed libraries available